Free, private, no install

STL Viewer

Open an STL file in 3D, measure it, and see its size, volume, weight and whether it is ready to print.

Last updated: November 2026

3D

Turn and zoom

Measure

Point to point

Watertight

Mesh check

Private

No uploads

Drop your STL file here

Binary or ASCII STL from any CAD program, slicer or model site. See its size, volume and weight, and check that it is closed.

Your file never leaves this device

How to view an STL file

01

Open the STL

Drop or choose a .stl file, binary or ASCII. It is read on your device, in the background for large files.

02

Turn it around

Drag to turn, scroll or pinch to zoom, or jump to the front, top or side. Switch on Wireframe to see the triangles.

03

Read the numbers

Width, depth and height in mm and inches, volume, surface area, solid weight and a mesh check sit beside the model. Press Measure to click two points and get the distance between them.

04

Save a picture

Save the current view as a PNG for a listing, a quote or a message.

What the numbers mean

Size

The width (X), depth (Y) and height (Z) of the box the model fits in, in millimeters and inches. Height is up, the way a slicer puts the model on the bed.

Volume

How much space the model takes up, in cubic centimeters and cubic inches, worked out exactly from its triangles when the mesh is closed.

Surface area

The total area of every triangle, in square centimeters: useful for painting, plating or coating quotes.

Solid weight

Volume times the density you enter. 1.24 g/cm³ is PLA, from the NatureWorks Ingeo datasheet; type your own material's density from its data sheet.

Separate parts

How many pieces the file holds. A single model should usually be one part; several can be fine for a print plate.

Measuring between two points

The size of the whole model is not always the number you need: the gap between two holes, the depth of a slot or the width of a single wall. Press Measure, click the first point, turn the model if you need to, and click the second. An orange line joins them, drawn on top so it stays visible from any side.

A click lands on the surface where you point. When it is within a few pixels of a triangle's corner, it snaps to that corner, so measurements between edges and holes use the exact coordinates in the file. The panel shows the straight distance in millimeters and inches, and how far apart the points are along X, Y and Z, the axes a slicer uses, with Z as the height. Like every number in the viewer, it follows the unit you choose for the file.

When a model looks tiny or huge

An STL file is a list of triangles and nothing else: there is no place in it to say what unit its numbers are in. Millimeters are the usual convention and slicers normally read STL numbers that way, so a model drawn in inches opens 25.4 times too small and one drawn in centimeters 10 times too small.

If the sizes look wrong, choose the unit the model was made in under Units in the file, and every figure, weight included, is corrected. To print it at that size, scale it by the same factor in your slicer, or export it again in millimeters.

Source: Library of Congress, STL (binary) format description.

Is the STL ready to print?

A printable model needs a closed surface, so the slicer can tell inside from outside. The mesh check joins triangles that share corners and looks at every edge: in a closed mesh each edge belongs to exactly two triangles, once in each direction. Anything else is reported:

Holes (open edges)

An edge used by only one triangle means a gap in the surface. Small gaps are often patched by slicers; large ones make the inside ambiguous.

Overlapping or doubled surfaces

An edge shared by more than two triangles, or by triangles facing opposite ways, usually means copied or intersecting faces.

Inside out

The triangles face inward, so the volume comes out negative. Most 3D programs can flip, or recalculate, the normals.

Triangles with no area

Leftovers from export that are usually harmless; slicers skip them.

Weight and material

The solid weight is the model's volume times the density of the material. The viewer starts at 1.24 g/cm³, the density NatureWorks lists for its Ingeo PLA; for another filament or resin, type the density from its data sheet.

A 3D print is rarely solid: walls and top and bottom layers are, but the inside is a lighter infill pattern. So the real part weighs less than the solid figure, and the slicer reports the exact filament use once you choose the settings. The solid figure is the upper limit, handy for comparing models or estimating cast and machined parts.

Source: NatureWorks Ingeo datasheet (Material Data Center), density 1240 kg/m³.

Other ways to open an STL file

Slicers

UltiMaker Cura, PrusaSlicer and Bambu Studio are free, open STL files and show them on a print bed with their size.

3D programs

Blender, FreeCAD and Fusion open STL for editing and repairs.

This viewer

For a quick look, the numbers and a check without installing anything, on a computer or a phone.

Need an STL to begin with? Turn a logo or picture into one with image to STL, a vector design with SVG to STL, or a photo with the lithophane maker, then check the result here. For 3MF files and slicer projects, use the 3MF viewer, for OBJ the OBJ viewer, and to open an STL in Blender, convert it with STL to OBJ. For pictures at any size, of many files at once or as depth maps, use STL to PNG.

Why use ImgTweak?

✓No upload, no account
✓Measure between points
✓Size in mm and inches
✓Volume, area and solid weight
✓Watertight check
✓Unit fix for inch and cm files
✓Works on phones

Your model is read on your device and never uploaded, so unreleased designs stay private.

Frequently asked questions

How do I view an STL file online?

Drop the STL into the viewer above. It opens in 3D straight away, with its size, volume and a mesh check beside it. The file is read in your browser and never uploaded.

Can I see the dimensions of my STL?

Yes. Width (X), depth (Y) and height (Z) are shown in millimeters and inches, measured across the whole model, the way a slicer measures it on the bed.

Can I measure between two points?

Yes. Press Measure and click two points on the model. A click near a corner snaps to it exactly, and you get the straight distance in mm and inches and how far apart the points are along X, Y and Z. Drag to turn the model between clicks to reach the other side.

Why is my model tiny or huge?

STL files store numbers, not units. Most are in millimeters, which is what the viewer and slicers assume. A model made in inches looks 25.4 times too small, one in centimeters 10 times too small; choose the unit it was made in and the sizes are corrected.

How is the volume worked out?

From the triangles themselves: each one adds the volume of the wedge between it and the origin, which sums to the exact volume of a closed mesh. If the mesh has holes, the figure is only an estimate.

How accurate is the weight?

It is the weight of a solid part at the density you enter: 1.24 g/cm³ is PLA. A real print is lighter, because its inside is filled with a pattern, not solid plastic; the slicer gives the exact amount once you choose the infill.

What does watertight mean?

That the surface is closed, with no holes: every edge joins exactly two triangles. Slicers need a closed surface to know what is inside the model. The viewer shows holes, overlapping surfaces and inside-out models when it finds them.

Can it repair my STL?

The viewer checks the file and tells you what is wrong. To fix it, open it in STL Repair, which fills holes, turns flipped faces and joins overlapping parts, also on your device.

Can I open 3MF or OBJ files?

3MF files open in the 3MF viewer, Bambu Studio and PrusaSlicer projects included, and OBJ files in the OBJ viewer, with their textures. Both give the same numbers and measuring.

What is the difference between binary and ASCII STL?

They hold the same triangles. ASCII writes them as text, which is readable but several times larger; binary stores the same numbers compactly. The viewer opens both, including binary files whose header starts with the word solid.

Is my STL uploaded?

No. The file is read, measured and drawn in your browser. Nothing is sent to a server, which matters for unreleased products and client parts.

Ready to look at your model?

Drop an STL above to see it in 3D with its size, volume and a mesh check.