How do I repair an STL file online?
Drop it into the repair tool above. It is checked and repaired at once, and the report shows what was fixed. Download the repaired STL when it says closed and watertight. The file never leaves your device.
Fix holes, flipped faces and overlapping parts so your STL is watertight and ready to print.
Last updated: November 2026
Watertight
Holes closed
Joined
Overlapping parts
Report
Every fix listed
Private
No uploads
Drop your STL file here
Binary or ASCII STL. It is checked and repaired at once: holes filled, faces turned the right way, overlapping parts joined.
Your file never leaves this device
Drop or choose a .stl file. It is read, checked and repaired on your device straight away.
Switch between Before and After in 3D. Problem edges show in red, and the report lists every fix.
Close small gaps, remove loose specks or keep overlapping parts apart, then repair again.
Save the repaired STL and load it in your slicer.
Related tools
Holes
Openings in the surface, from a missing triangle to an open base, are covered with new triangles.
Flipped and inside-out faces
Triangles facing the wrong way are turned so neighbours agree, and parts that are inside out are turned the right way out. The inner wall of a hollow part keeps facing in.
Seams that don't meet
T-junctions, where corners on one side of a seam don't match the other, are joined by splitting triangles.
Repeats, slivers and double walls
Triangles repeated in the file, triangles with no area, and pairs of triangles back to back inside the model are removed.
Overlapping parts
Parts that pass through each other, such as an arm through a body or a handle through a mug, are joined into one solid with a single outer surface.
Gaps and loose pieces
Optionally, corners that almost meet are joined to close cracks, and specks far smaller than the model are removed.
Every fix is counted in the report, and the before-and-after view shows the problem edges in red, so you can see what changed rather than trust it blindly. Parts of the model that weren't broken keep their exact triangles.
An STL file is a long list of triangles with nothing to hold them together but their corners. Small mismatches are easy to make and hard to see:
Exports from CAD and design programs
Curved surfaces are cut into triangles separately, and where two surfaces meet, their edges don't always line up.
3D scans and photogrammetry
Areas the scanner couldn't see become holes, and stray specks float around the model.
Models made for screens
Game and animation models are often open shells or overlapping parts, which look fine on screen but can't be printed as they are.
Joining and editing
Parts placed together without being merged overlap, and edits can leave flipped or repeated triangles behind.
A part that crosses itself
A single surface that passes through itself (rather than two parts overlapping) can't be untangled automatically; slicers usually still print it.
Large openings
A missing base or side is closed with a flat cap. If the model needs a shaped surface there, a 3D program is the place to model it.
Walls that are too thin
A closed model can still have walls too thin to print. The repair doesn't thicken them; the slicer's preview shows where they are.
When something can't be fixed safely, the repair leaves it and says so, instead of guessing and changing your model in ways you didn't ask for.
Slicers repair models to a certain degree when they load them, so a model with a few small faults often prints fine. Prusa's own guide notes that not every broken model can be repaired that way, and points to separate repair tools for the rest.
A repaired file is worth having when a slicer shows warnings or gaps in the layer preview, when you share or sell the model, when you need its true volume and weight, or when another program refuses it. To see first whether a file has problems, open it in the STL viewer: its mesh check reports holes and inside-out models.
Joining overlapping parts uses manifold, an open-source library for exact solid geometry, running in your browser like everything else here. Many online repair services process your file on their own servers; here it stays on your device from start to finish.
Sources: Prusa Research, Corrupted 3D models for printing; manifold, the open-source solid geometry library used to join parts (Apache 2.0).
Your model is repaired on your device and never uploaded, so unreleased designs and client parts stay private.
Drop it into the repair tool above. It is checked and repaired at once, and the report shows what was fixed. Download the repaired STL when it says closed and watertight. The file never leaves your device.
That the surface is closed: every edge joins exactly two triangles, and all of them face outward. A slicer needs that to tell inside from outside, and to work out the walls and infill.
Many of them. Edges shared by more than two triangles usually come from parts touching or overlapping, and those are separated and joined into one solid. Tangled geometry that can't be safely untangled is left as it is, counted in the report and drawn in red.
Only where it was broken. Holes get new triangles across them, flipped faces are turned, and overlapping parts become one outer surface. Everything else keeps its exact triangles; a model with nothing wrong comes out unchanged.
Each opening is traced around its edge and covered with triangles in its own plane. A small hole closes invisibly; a large opening, such as the open neck of a bust, gets a flat cap, which is usually what you want for printing.
A seam where one side has a long edge and the other side has extra corners along it. There is no visible gap, but the triangles don't connect. The repair splits the long edge's triangle at those corners, so both sides meet.
When parts of a model overlap, adding up each part's volume counts the overlap twice. Joining them into one solid removes that double count, so the weight a slicer reports is the true one.
Slicers repair models to a certain degree when they load them, and they often cope with small faults. A repaired file is still worth having: it loads cleanly in any slicer, shows the right volume, and works in programs that refuse broken meshes.
It repairs STL. Convert a 3MF or OBJ with 3MF to STL or OBJ to STL first, then repair the result here.
No. Reading, repairing and saving all happen in your browser, so unreleased designs and client parts stay on your device.
Drop an STL above and download it watertight.