Free, private, ready to cut

JPG to DXF Converter

Turn a JPG logo, scan or photo of a drawing into closed DXF outlines, with the JPEG noise cleaned up.

Last updated: November 2026

Clean-up

Specks removed

Closed

Cut outlines

mm or in

Real size

Private

No uploads

Drop your JPG here

Logos, scans and phone photos of drawings. Shaded paper and Clean-up handle the rest.

Your image never leaves this device

How to convert JPG to DXF

01

Add your JPG

Drop or choose the JPG or JPEG: a logo, a scan, or a phone photo of a drawing.

02

Clean it up

Black and white with Automatic for clean images, or Shaded paper for a drawing photographed on paper. Raise Clean-up until the specks are gone.

03

Size the cut

Type how wide the finished piece should be, in millimeters or inches; its height comes from the drawing.

04

Compare, then save

Slide Compare across the photo to check every outline, zoom in on fine lines, then save the DXF.

Which JPGs make good cut files

Logos saved as JPG

Automatic colors in Logo or icon find the real colors under the JPEG blur, so a two-color logo gives two layers, not hundreds of near-matches.

Phone photos of drawings and signatures

Black and white with Shaded paper compares each pixel with its surroundings, so a shadow across the paper doesn't turn into a black patch.

Scans

Scans are evenly lit, so Automatic usually works. Raise Clean-up for dust and paper texture.

Photos

Black and white with Manual level makes a silhouette. Pick a photo with a clear shape against a plain background.

Why JPGs need cleaning before cutting

JPEG saves space by blurring fine detail, which leaves soft, blotchy edges and faint specks around shapes. A tracer that followed every one would give a cutter thousands of tiny outlines to cut. This tool first reduces the image to clean black and white or a few exact colors, then drops specks smaller than the Clean-up size.

Use Compare to check the cut lines against the photo at 4x zoom. If a thin part has broken up, lower Clean-up; if specks remain, raise it. When you have the same artwork as a PNG, the PNG to DXF converter starts from sharper edges.

Scanning or photographing a drawing

Draw it

Use a dark marker or pen on plain white paper. A drawn line is traced around both its edges, so it becomes a thin shape: make lines at least about 1 mm wide at the size you will cut if they must hold together.

Scan it

A flatbed scan at 300 dpi gives about 11.8 pixels per millimeter, enough for most drawings; use 600 dpi for fine detail. Scans are evenly lit, so Automatic usually works.

Or photograph it

Use daylight or even room light, hold the phone flat above the paper with no flash, and fill the frame with the drawing. Shaded paper copes with the shadow your hand or phone casts.

JPG quality and the cut

Every time a JPG is saved it loses a little detail, and pictures sent through chat apps are often made smaller and saved again on the way. Use the original from your camera or scanner, not a copy that has been shared or edited several times.

When you save a JPG yourself, choose high quality. The outlines then follow your lines instead of the blocky edges compression leaves around them. In the DXF you get AutoCAD R12 with closed outlines in the unit you chose; Cricut Design Space takes it on Windows and Mac but not in its phone apps, and Silhouette Studio opens it in every edition. The image to DXF guide covers units and layers.

Sources: Cricut, How to upload images into Design Space; LightBurn, File management; Silhouette, File types and features; Silhouette, Importing and exporting troubleshooting.

Why use ImgTweak?

✓Cleans up JPEG blur and specks
✓Copes with shadows on paper
✓Exact finished width
✓Sketches stay on your device

Frequently asked questions

How do I convert a JPG to DXF?

Drop the JPG into the converter above. A sketch or scan usually needs only Black and white; a colored logo works best with Logo or icon. Type the finished width, check the outlines with Compare and save the DXF, all without the photo leaving your device.

Why does my DXF from a JPG have so many small outlines?

JPEG compression leaves blur and blocky noise around edges, and every speck can become an outline. Raise Clean-up, use Black and white or fewer colors, and start from the least-compressed copy you have.

Can I turn a photo of a hand drawing into a DXF?

Yes. Use Black and white with Shaded paper, which follows the ink even where the paper is in shadow. Draw with a dark pen on plain white paper and photograph it straight on, in even light.

Can I convert a photo of a person or object to DXF?

As a silhouette or poster-style outline, yes: Black and white with Manual level sets how dark counts as solid. A DXF can't hold shading, so a photo becomes flat shapes. Clear outlines against a plain background work best.

What is the difference between JPG and JPEG to DXF?

None. JPG and JPEG are the same format with different file name endings, and both work here, as do JFIF files.

What scan resolution should I use?

300 dpi suits most drawings: that is about 11.8 pixels per millimeter, so a 1 mm pen line is about 12 pixels wide. Scan at 600 dpi for very fine lines, in grayscale rather than color, and save at high JPG quality or as PNG.

Will the outlines be smooth enough for a laser?

Yes. Curves are written as short straight segments within 0.01 mm of the traced curve. If edges still look wobbly, the JPG itself is the limit: raise Clean-up, or start from a larger copy that has been saved fewer times. LightBurn imports the DXF directly.

Does my JPG leave my phone or computer?

No. The JPG is traced and the DXF written in your browser, so sketches, scans and client work stay private.

Ready to convert your JPG?

Add a JPG above, clean it up, and download a DXF ready to cut.